A nail gun not shooting nails can be a frustrating problem. Luckily, it's often easy to troubleshoot and fix. In this blog post, I'll walk you through the most common causes of this issue and how to correct them. I'll also show you how to properly maintain your nail gun so that this doesn't happen again. Keep reading for more information!
1. Incorrectly positioned nails
One of the most common causes of nail guns not firing correctly is when the nails are not positioned properly within the gun. This can happen if the nails are loaded incorrectly or if they become jammed during use. To prevent this from happening, double-check that the nails are properly loaded before each use.
2. Clogged air passages
Another common cause of nail guns not firing correctly is when the air passages become clogged. This can happen if there is debris or dust in the gun, or if the gun is not properly lubricated. To prevent this from happening, make sure to clean the gun regularly and lubricate it according to the manufacturer's instructions.
3. Worn out parts
Another common cause of nail guns not firing correctly is when parts become worn out. This can happen from normal wear and tear or extended use. To prevent this from happening, regularly inspect the gun for any worn out parts and replace them as needed.
4. Incorrect pressure
If the pressure in the nail gun is not set correctly, it can cause the nails to be fired incorrectly. This can be a problem if the pressure is too high or too low. To prevent this from happening, follow the manufacturer's instructions on how to set the pressure.
5. Clogged air filter
Another common cause of nail guns not firing correctly is a clogged air filter. This can happen if the gun is not used often or not cleaned properly. To prevent this from happening, clean the gun regularly and replace the air filter as needed.
6. Dirty or wet nails
If the nails used in the nail gun are dirty or wet, they can cause the gun to misfire. To prevent this from happening, clean the nails before using them in the gun.
7. Wrong size nails
Using nails that are too big or too small for the nail gun can also cause the gun to misfire. To prevent this from happening, make sure to use the correct size nails for the gun.
8. Damaged air hose
If the air hose connected to the nail gun is damaged, it can cause the gun to misfire. To prevent this from happening, check the air hose for damage before using the gun.
9. Clogged air filter
If the air filter on the nail gun is clogged, it can cause the gun to misfire. To prevent this from happening, clean the air filter as needed.
10. Low air pressure
If the air pressure in the nail gun is low, it can cause the gun to misfire. To prevent this from happening, keep the air pressure at the correct level.
How to fix a nail gun that’s not shooting nails?
If your nail gun isn't shooting nails, there are a few things you can do to try and fix the issue. Often, the problem is simply that the gun needs to be cleaned or that the air pressure is too low. However, there may be other issues at play as well. So here's a look at seven steps you can take to try and fix a nail gun that's not firing nails.
1. Check the air pressure.
The first thing you should do if your nail gun isn't firing nails is to check the air pressure. If the pressure is too low, the gun won't have enough power to shoot the nails. So you'll need to adjust the pressure accordingly.
2. Clean the gun.
Another common reason nail guns don't fire nails is that they're dirty. Over time, dust and debris can build up inside the gun, preventing it from firing properly. To clean the gun, you'll need to disassemble it and then use a brush to remove any dirt or debris.
3. Check the nails.
If the nails you're using are too small or too big, they might not be compatible with your gun. Make sure you're using the right size nails for your gun.
4. Replace the piston seal.
If the piston seal is damaged, it can cause air to leak out of the gun, preventing it from firing nails. To replace the piston seal, you'll need to disassemble the gun and then replace the seal.
5. Replace the driver blade.
If the driver blade is damaged, it can prevent the gun from firing nails. To replace the driver blade, you'll need to disassemble the gun and then replace the blade.
6. Adjust the air pressure.
If the air pressure is too low, it can prevent the gun from firing nails. To adjust the air pressure, you'll need to consult your gun's manual.
7. Clean the trigger valve.
If the trigger valve is dirty, it can prevent the gun from firing nails. You'll need to disassemble the gun and then clean the valve to clean the trigger valve.
If you've followed all of these steps and your nail gun still isn't firing nails, it's time to consult a professional.
Here's how to troubleshoot a pneumatic nail gun that isn't shooting nails:
What are some tips for avoiding problems with your pneumatic nail gun in the future
- Always read the manufacturer's instructions before using your pneumatic nail gun. This will help you understand how the tool works and what safety precautions to take.
- Inspect your pneumatic nail gun regularly. Ensure that all parts are in good working condition and that no damage could potentially cause the tool to malfunction.
- Use the correct size air compressor for your pneumatic nail gun. If you use an air compressor that is too small, it won't be able to generate enough power to operate the tool properly.
- Always use the proper nails for your pneumatic nail gun. Using the wrong type of nails can damage the tool and cause it to malfunction.
- When loading nails into the pneumatic nail gun, follow the manufacturer's instructions. If you don't load the nails properly, it could cause a jam that could damage the tool.
- Always use the safety features on your pneumatic nail gun. These features are there for a reason and can help prevent accidents.
- Be sure to properly maintain your pneumatic nail gun. This includes oiling and cleaning the tool regularly. Failing to do so can shorten the tool's lifespan and cause it to malfunction.
- When not in use, be sure to store your pneumatic nail gun in a safe place. This will help prevent accidents and keep the tool in good working condition.
- Be aware of your surroundings when using a pneumatic nail gun. If you are working in an area with flammable materials, be extra careful to avoid any accidents.
Bostitch Nail Gun Not Shooting Nails
BOSTITCH nail guns are designed to be durable and reliable. However, like any tool, they can sometimes have issues. If your BOSTITCH nail gun is not firing nails, here are a few potential causes and solutions:
- Check that the fastener guide is properly positioned over the magazine. If it is not, the gun will not fire.
- Make sure that there are nails in the magazine. It may seem obvious, but if there are no nails in the gun, it won't be able to shoot them!
- Ensure that the trigger is fully engaged. The BOSTITCH trigger must be fully depressed for the gun to fire.
- If the gun is still not firing, there may be a problem with the driver blade. This part can become bent or damaged, preventing it from striking the nails properly.
- In some cases, the nose of the nail gun may become jammed with debris. This can prevent the driver blade from moving correctly and cause misfires.
- Another potential issue is a damaged firing valve. This part is responsible for releasing air from the chamber and can become stuck in the open position.
- Finally, if all else fails, there may be a problem with the air compressor. If there is not enough pressure, the gun will not be able to fire properly.
- If you're having trouble with your nail gun, it's important to troubleshoot the issue and find the root cause. Then, you can avoid potential damage to your tools and ensure that your projects are completed successfully.
Ryobi Airstrike Nail Gun Not Shooting Nails
Here are a few possible reasons why your Ryobi Airstrike Nail Gun might not be shooting nails. The first thing to check is whether there is any residue build-up on the firing pin. If there is, you will need to clean it off with a razor or some other sharp object.
Another possibility is that the o-ring on the firing pin has become damaged and needs to be replaced.
Finally, it could simply be that the air pressure in the gun has dropped below the level required for proper operation. In any case, you should consult your user manual for troubleshooting tips specific to your nail gun model.
Porter Cable Nail Gun Not Shooting Nails
If your Porter Cable nail gun isn't shooting nails, there are some potential causes:
- Check to make sure that the air pressure is set properly. If the pressure is too low, the nails won't be driven into the surface correctly.
- Make sure that the firing pin is not jammed. Sometimes debris can build up and cause the firing pin to get stuck. Simply cleaning it out can solve the problem.
- Check to see if there are any nail jambs In the gun itself.
If so, simply remove them and reinsert fresh nails. With these tips, you should be able to get your Porter Cable nail gun working again in no time!
Dewalt Nail Gun Not Shooting Nails
A few things could be causing your Dewalt nail gun not to shoot nails. One possibility is that the nails are not getting enough air pressure. This can be caused by several things, such as a dirty air filter or blocked air hose.
Another possibility is that the nails are not getting enough voltage. If the voltage is too low, it will not be able to sufficiently drive the nail into the wood.
Finally, it's also possible that the striker mechanism is malfunctioning and needs to be replaced. If none of these solutions work, you may need to take your gun in for repair.
Paslode Nail Gun Not Shooting Nails
There could be a few reasons why your Paslode nail gun isn't firing. Let's take a look at some of the most common causes:
- The air filter might be dirty. Check the air filter and clean it if necessary.
- The O-rings might be worn out. Inspect the O-rings and replace them if necessary.
- The safety switch might be engaged. Make sure the safety switch is in the "off" position.
- The trigger assembly might be defective. If this is the case, you'll need to check with Paslode for a replacement trigger assembly.
- Something might block the air flow hose leading to the gun. Inspect the hose for any blockages and clear them if necessary.
- The driver might be defective. You'll need to check with Paslode for a replacement driver if this is the case.
- The battery might be dead or defective. Try charging the battery or replacing it with a new one if necessary.
- The gun might be jammed. Try clearing the jam according to the instructions in your owner's manual.
If you've tried all of these troubleshooting steps and your Paslode nail gun still isn't working properly, you'll need to take it to a qualified repair person for further diagnosis and repairs.
FAQs about Nail Gun Troubleshooting
Why my nail gun is just blowing air?
There is likely a problem with the air compressor.
It is important to check the air compressor before using the nail gun. If there is no air coming out of the gun, it could be due to a lack of air in the compressor tank. This will cause the nail gun to only blow air and not shoot nails.
Why does my nail gun shoot two nails?
If you're experiencing your nail gun firing two nails at once, there are a few potential reasons this might happen.
First, check to see if the fastener chamber is fully loaded with nails - if not, that could be causing the issue.
Secondly, take a look at your compressor - if the pressure isn't set properly, that could also trigger your nail gun to fire two nails instead of just one.
Lastly, there may be something blocking the magazine release valve, which would result in two nails being released each time you pull the trigger.
If you can't figure out what's causing the problem, it's best to consult a professional or take your nail gun to a service center for further troubleshooting.
Final Words
I hope this article helped answer your question of why your nail gun isn't shooting nails. It is always important to troubleshoot when something isn't working correctly, and hopefully, this guide provides you with the knowledge and resources to do just that. Thanks for reading!