• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

  • Home
  • Power
    • Nailer
    • Sander
    • Air Compressor
    • Paint Sprayer
    • Screw Gun & Driver
  • Hand
    • Axe
    • Chisels
    • Clamps
    • Wrench & Screwdriver
  • Household
    • Lighters
    • Flashlights
  • Measuring
    • Level
    • Square
  • Automotive
    • Car Care
    • Car Electronic
  • Garden
    • Pressure Washer
    • Garden Hand Tools
    • Garden Tool Attachments
  • Blog

How to Remove Faucet Handle without Screws? [Steps for 3 Different Style]

January 31, 2023 by Wesley Raymond 2 Comments

You may find various reasons for wanting to take out a faucet handle, depending on your intent. Faucets are easy to wipe unless you're very lazy. You have to take the handle off a faucet without a screw if you are not a beginner. More advanced technologies and designs have eliminated the need for faucet handle screws.

Grasping the faucet handle will get you most handle off without using any screws. The handles on creative faucets are becoming more and more common. You could have been in a situation where you could perform faucet removal without using a screwdriver. Unless you changed a cartridge, cleaned it, found a leak, or replaced the handle, it's probably unnecessary to do something else with the cartridge.

It would take no effort to remove shower faucet handle no visible screws if you would turn the screw in the center of the handle. However, if the attempt at persuasion doesn't succeed, don't give up. It is rapid to take off the handles without screws, too. You can read the content for knowing more updates about how to remove faucet handle without screws.

Related: Best Wrench for Tight Spaces: Top 10 Reviews, Comparisons and Buying Guide

How to Remove Faucet Handle without Screws

Table of Contents

Reason to Remove Faucet Handle:

  • You may substitute it with another
  • It is essential that the cartridge inside be replaced
  • Take care of the handle's inside
  • Figure out where it's dripping
  • Adjust or manipulate 

What Kind of Faucet Handle do You Have?

Style-1: Button or Capped Faucet Handle

When writing the words "hot" or "cold" in stylized script on the top of a faucet, it indicates a temperature setting that is usually a capped faucet. A kitchen and bathroom tapped faucet typically will only be covered by a cap and a plug for looks and repairs, and you can remove the cap and the plug to use it. Button options include "H" for hot, "C" for cold, and clear, in chrome, and then polished or brushed nickel, which is divided into more sub-choices.

If the faucet handle is loosened, you usually have to remove it to fix the faucet. Unfortunately, you can't see the dirt because it's either concealed under the cap or hidden behind the handle.

Style-2: Double Faucet Handle

This type of faucet has two different handles to adjust the temperature and pressure and a nozzle for when you want the water to be released. This is usually found as a fourth category rather than as a function to have a pullout nozzle on its own. This fixture provides an excellent option when your kitchen or bathroom has a wide countertop and water-free feature area.

Style-3: Lever-Style (Low Arc) Faucet Handle

Low art spouts rest in the sink basin and splatter when turned on. Since they minimize the distance the water travels from the faucet to the sink, they are mostly used in commercial or public areas. A dual-lever sink faucet's handles can be used to turn the water on and off. Each faucet handle can regulate both hot and cold water independently to increase or decrease the temperature.

Usually, if there are two centered holes in the walls, 8 inches apart from the middle to the center, they can fit two-hole widespread faucets for easy wall mounting. Mounted to the wall, these are less likely to obstruct other items in a small or busy kitchen. To get both hot and cold water, the faucets blend the supplies into one to come out to you.

Required Tools and Equipment for this Project

  • A pair of pliers
  • Flat-head screwdriver
  • A piece of cloth
  • Allen wrench
  • Adjustable wrench
  • A handle puller set
  • Distilled white vinegar

Related: How to Remove a Jacuzzi Tub?

Removing Faucet Handle without Screw: Steps for 3 Different Style

Do you eagerly want to know how to remove kitchen faucet handle without screws?

To learn how to remove a bathroom sink faucet handle without damaging it, you should know how to turn safely it off the sink first. Remove screwless faucet handle is very cool because it doesn't need much effort and tools. You can follow these steps.

Style-1: Button or Capped Style Faucet Handle [5 Steps]

Step 1: Locate the Cap or Button

Locate the cap or button around the faucet handle. More often than not, it is on the top or side.

Step 2: Use a Flat Screwdriver to Pop out the Button or Cap

Place a small flat screwdriver in the gap of the handle and turn it counterclockwise but slowly. Most faucets and spouts are very delicate, so you should treat them with care. If they are not treated with caution, they can easily be broken. Fortunately, it is often possible to obtain a substitute from the online vendor or the nearest store.

Step 3: Turn Off the Water Supply

Turn of the water supply is necessary only when you are changing the cartridge.

Step 4: Remove the Hidden Screw

To get the tape off, remove the cap or the button. It'll do the best. To size the wrench correctly for the screw, you must first identify the size of the screw you need. Due to their small size, screws are capable of penetrating the drainage hole. Always make sure the screw hole is covered or covered until you remove it.

Related: How to Remove a Stripped Screw?

Step 5: Pull the Handle

When the plug is pulled, turn off the faucet. Use your pliers or a kitchen faucet if you need to, but also, use your hands to extract it. Holding the object next to the faucet and applying pliers can cause scratches to your faucet handle. Instead, use a cloth or towel to cover the tool's handle, then wrap the handles to remove screwless faucet handle.

You might find residue leftover mineral deposits after you've removed the handle. It's advisable to get rid of fleas with white vinegar or lemon.

After you've cleaned or replaced the cartridge, make sure to return everything, including the cap, to its location.

Style-2: Double Faucet Handle Style [4 Steps]

Step 1: Turn Off the Water

Do you know how to remove shower handle without screws for the double facet handle type? For doing this, at first turn off the water supply to the under-sink reservoir is a precautionary measure.

Step 2: Twist the Handle's Base

When the faucet is kept steady, rotate the faucet base in the counterclockwise direction for removing it.

Step 3: Remove the Screw

To reassemble the faucet, you must first take off the screw that attaches the stem to the base. If you hold the base, use a screwdriver to support it.

Step 4: Pull Out the Cartridge

You can see a white cartridge attached to the screw until the screw is removed. You can remove them with nose-needle pliers and then replace them. People also complained that most cartridge tools need pliers to remove, regrettably. To stop this, purchase quality bathroom fixtures such as Delta and Moer. Such products provide total support and can be returned or replaced if required.

Style-3: Lever-Style (Low Arc) Faucet Handle [4 Steps]

Step 1: Remove the Button

On the front of the faucet, you'll find a spout and two buttons for controlling the temperature. Use a flathead screwdriver to support the edges of the buttons as you click. Care should be taken when extracting or handling the buttons because they are delicate. The buttons are of medium scale, which allows them to drain comfortably. Furthermore, you have to make sure that you have covered the drain properly before transferring them to the drain.

Step 2: Remove the Allen Key

When you have finished removing the button, you will find an Allen wrench. Thus, you need this flat wrench to remove bathroom faucet handle without screws and releasing the key.

Step 3: Pull off the Faucet Handle

Once the Allen key is out, the bathroom faucet handle must be lifted to detach the fixture. If you've removed the cartridges, you could damage the faucet. If you need to do it correctly, you must unscrew the cartridge cap. If you remove the Allen key, you'll be in the line of the faucet to know precisely where the water comes out.

Step 4: Expose the Cartridge

When the Allen key is no longer accessible, you can discover a gold-colored spout on the faucet. Please get rid of it by hand. If it's hard to do, use an old towel to wind it around and use a socket wrench to remove it. This piece of cloth will safeguard the valuable gold-colored piece from harm, as it prevents damage from getting to it.

In most cases, it is more cost-effective to get a new cartridge rather than rebuilding the old one. When a cartridge is dismantled, it doesn't work well. They like what they get, so it's not worth asking about. The only way to solve this problem is to install a new system.

Here's a video showing how to remove a faucet handle without screws:

The Unexpected May Happen: 3 Precautions

Before you begin faucet work, you can read these safety guidelines. Then, whenever you have to do a home repair, you can count on it. Save yourself any future headaches by doing a few easy things now.

Turn off the Water

Are you in a fix about how to fix a faucet handle that came off?

To eliminate this problem, you must shut off the water before you disassemble to remove faucet handle no screw. Occasionally a faucet can fall off with water flowing; however, when you turn off the water, turning it back on the handle to fix it. Also, if the valve body is damaged or faulty, turning off the water source can solve the problem.

Close the Drain

It can contain several different tools and small parts. The best thing to do when anything slips down the drain or falls out of the opening is to place a small towel over it to catch it or close the drain when no tools are in use. But, of course, there will be even more effort if you have to disassemble the drain too.

Protect your Faucet

When you have to use equipment such as pliers, a gripping tool will protect the finish of your fixtures. Not ever rough handling, scraping, or gouging the finish on your faucet or faucet handles is always the best way to go.

Final Words

Several models and designs are available for bathroom faucets. The while their primary objective of these handles is to hold the faucet in place and convey water. Their ornamental value should not be underestimated since they are attractive.

Sleek handles enhance the outlook of the sink and improve the appearance as they are pleasant to look at. Because of their ability to serviceability, it might be enough to remove their handles without any screws. If you want to make sure you won't damage your bathroom faucet, do your research on removing the types of faucets. Next, find out the proper method about how to remove a leaky faucet handle without screws.

Without screws. I hope that this content would help you make proper installment to remove the faucet handle without screws.

Related:

How to Remove a Tub Spout That’s Stuck?

How to Remove Tile Countertop? [Step By Step Guide]

Filed Under: Blog

Reader Interactions

Comments

  1. John braun says

    April 21, 2022 at 9:24 pm

    My facet handle is loose and there are no screws to tighten or remove the hot water handle. Help!!

    Reply
  2. plumbing biloxi says

    June 18, 2022 at 6:00 am

    Thanks for this detailed faucet removal guide

    Reply

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Primary Sidebar

Search this website

Disclosure

toolsprokit.com participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to Amazon.com and affiliated sites.

  • About us
  • Disclaimer
  • Privacy Policy
  • Contact

As an Amazon Associate I earn from qualifying purchases.

Copyright © 2023 — Tools Pro Kit • All rights reserved.