Looking to get some vinyl plank flooring at your home? They are an obvious choice if you are considering hygiene and durability. And there are a variety of designs or patterns you can choose from as well. All in all, they are a great choice.
So, if you are planning to get some vinyl plank flooring, then kudos to you. However, you will need to know how to cut vinyl plank flooring around the corner. To install them on the corners, you will have to make some cuts here and there to fit them.
That’s what I will tell you in this article. Stick around till the end.
If you are thinking of starting the process from the corners, then you should drop that idea. When it comes to vinyl flooring, you should always start from the center portion of your room. First of all, you have to measure your room and measure your vinyl planks. Then you leave some space on the sides of the room that you will fill in the very end. This is where you have to cut the vinyl planks to fit in.
This is important because it makes your work much easier. You can attach ten planks at once to cover more area, and it’s much more convenient.
When laying the planks, make sure to use proper direction for them. If there is a light source in your room, then you can use that as a direction to lay the flooring. Or you can lay them parallelly to the longest wall in the room.
Tools Required for Cutting Vinyl Plank Flooring
There are some tools that you will need to cut the vinyl planks.
- Measuring tape
- Utility knife
- T-square
- Clamps
- Electric jigsaw or circular saw
- Marking pen
- Chalk line
Procedure for Cutting Vinyl Plank Flooring around Corners
Now, let’s get to the real thing, cutting planks for the corners.
Step-1: Plan for corners
Before you even begin your work, make sure to plan. You have to consider the corners and how you will be approaching them. Keep some planks aside only to use them for the corners. This way, you won’t run into any issues when flooring the corners.
Step-2: Measure the area
Next, you have to measure the corner areas. Based on that, you will be cutting your vinyl planks. So, make sure to take the proper measurement. You can use the measuring tape to measure the corner areas if you need to keep some gap count that in beforehand.
Step-3: Determine the corners’ shape
This step is very important. Because many times people don’t consider the actual shape of the corners and make mistakes. But once you cut the planks, there is no going back. So, you have to make sure that the shape you cut is perfectly aligned to the corner.
That’s why you will need to determine the corner shape. To do that, you can use a piece of paper and cut out the exact shape of the corner.
Step-4: Use a T-square to mark the plank
Now, you have to use the T-square to mark out the plank. Using a T-square, you will be able to measure the angles of the corners precisely. It also helps a lot in cutting the planks evenly throughout.
Step-5: Make the environment clean and safe
Take a break and clean up your surroundings. Once you have marked the planks, all there is left is to cut them properly. So, move away from everything that you don’t need for cutting the planks.
Step-6: Ensure the vinyl is stable using clamps
Cutting vinyl planks can be troublesome because they will move around a lot. As you will need precision in your cutting, you will have to ensure that the planks stay stable. To do that, you can use clamps to hold the planks and make sure they are stable. Make sure to keep only the part you will be cutting on the outer side.
Related: Best Right Angle Clamps: Top 10 Reviews, Comparisons and Buying Guide
Step-7: Cut corners using a jigsaw
The best tool to cut corners is the jigsaw. It comes with precision and ease of cutting down small parts. All you have to do is put the jigsaw inside the plank through a narrow incision on the mark. Then start cutting along the mark you made on the plank. Try to do the cuts in single motions for smoothness around the edges. Just be careful not to damage the groove layer of the plank.
Once you have cut down, check for the smoothness. If you think it should be smoother, you can use the utility knife to smoothen the edges. But don’t overdo it.
Step-8: Check it fits well in the targeted areas
Lastly, you have to check if the planks are fitting the areas or not. If they aren’t, you have to go through some little adjustments to fit perfectly in the areas. You can do those using pliers or knives.
And that’s how you can cut vinyl planks for corner flooring. As you can see, it’s not that difficult. You have to put some emphasis on the measurements, and you are good to go.
Watch this video to learn how to cut vinyl floors in corners:
Can you cut vinyl plank flooring with a table saw?
Many people ask if you can cut a vinyl plank with a table saw. Well, the idea might seem absurd at first because of the power that table saw packs. But it’s a great way to cut vinyl planks if they are fairly large. In short, yes, you can cut vinyl plank flooring if they are thick and large.
Can you cut vinyl plank flooring with a miter saw?
Yes, you can cut a vinyl plank using a miter saw. However, the plank has to be thick and rigid. In such cases, using a miter saw is a great idea. Because you can cut the planks easily and rapidly, but for regular planks, this might not be the best solution.
Final Words
To sum things up, cutting vinyl planks isn’t that difficult of a process. You can do it yourself. And now that you know how to cut vinyl plank flooring around corners, you won’t have any problems because the corners are the most critical parts of this process. As you can tell from the article, measurement is the key to precision here.