Utility maintenance crews always look for ways to improve efficiency and save money. One way they can do this is by converting pressure washers into sewer jetters. This guide will show you how to do this in just a few simple steps. Converting your pressure washer into a sewer jetter is a great way to clean your lines without spending money on a dedicated sewer jetter. So, if you're looking for a way to improve your maintenance operations, give this conversion a try!
Table of Contents
Can you use a pressure washer as a sewer jetter?
Yes, you can use a pressure washer as a sewer jetter. This is because the pressure washer can create high water pressure. The pressure washer also has a wand that can be used to direct the water into tight spaces. In addition, sewer jetters typically have a hose inserted into the sewer line to blast away anything obstructing the flow of water forcefully.
Pressure washer vs sewer jetter
When cleaning outdoor surfaces, there are two main types of equipment that can be used: pressure washers and sewer jetters. Both have unique benefits and drawbacks, so choosing the right one for the job is essential.
Pressure washers are ideal for cleaning large surfaces quickly and efficiently. They use high-pressure water to blast away dirt, grime, and other debris. However, they can also be used to damage delicate surfaces, so it's essential to use them with care.
On the other hand, sewer jetters are designed to clean drain pipes and other small, hard-to-reach areas. They use high-pressure water to break up clogs and clean away buildup. However, they can be difficult to use and are not always effective at removing stubborn debris.
So, which is the better option? It depends on the job at hand. If you need to clean a large area quickly, a pressure washer is a way. On the other hand, if you need to clean a small area or remove a stubborn clog, a sewer jetter may be your best bet.
What you will need to convert a pressure washer into a sewer jetter?
If you have a pressure washer, you may wonder if it can be converted into a sewer jetter. The answer is yes, it is possible to do this with the right supplies. Here is a list of what you will need:
- A pressure washer
- A sewer jetter kit (available for purchase online or at your local hardware store)
- A garden hose
- A water supply (such as a spigot or hose bib)
With these supplies, you can convert your pressure washer into a sewer jetter and clean your pipes quickly and easily. sewer jetters are a powerful way to clean your pipes, and they can save you a lot of time and money in the long run.
How to convert a pressure washer into a sewer jetter?
A pressure washer is a powerful tool that can be used for various cleaning tasks, including blasting away dirt and grime from surfaces. However, did you know that a pressure washer can be converted into a sewer jetter? A sewer jetter is a specialized type of pressure washer that is specifically designed for cleaning sewer lines.
If you have a pressure washer and are looking for a way to clean your sewer lines, read a step-by-step guide on converting your pressure washer into a sewer jetter.
1. Assemble the Sewer Jetter Kit:
Begin by assembling the sewer jetter kit according to the instructions that came with it. Once the kit is assembled, attach it to the pressure washer.
2. Connect the Garden Hose:
Next, take the garden hose and connect one end to the water supply. Then, connect the other end of the garden hose to the pressure washer.
3. Turn on the Water Supply:
Now it's time to turn on the water supply. This will provide water to the pressure washer and allow you to use it as a sewer jetter.
4. Begin Cleaning:
Once the water flows, you can begin cleaning your sewer lines with the pressure washer. Start at one end of the line and work your way to the other, flushing out all dirt and debris as you go.
5. Shut Off the Water Supply:
When cleaning, be sure to shut off the water supply. This will prevent water damage if the pressure washer is left on by accident.
6. Disconnect the Garden Hose:
Disconnect the garden hose from the pressure washer and disconnect it from the water supply. Drain any remaining water from the hose before storing it away.
7. Disassemble the Sewer Jetter Kit:
Once you're finished using the sewer jetter, disassemble the kit and store it away for future use.
8. Store the Pressure Washer:
Last but not least, be sure to store the pressure washer in a safe place. This will ensure that it's ready to use the next time you need it.
That's all there is to it! Following these simple steps, you can easily convert your pressure washer into a sewer jetter and use it to clean your sewer lines. Follow all safety precautions when using the pressure washer, and always disconnect it from the water supply when you're finished.
Recommended sewer jetter kits to convert a pressure washer into a sewer jetter
If you're looking for a way to clear clogged drains without calling a professional, consider investing in a sewer jetter kit. Sewer jetters are designed to blast through clogs and buildup in your drains using high-pressure water jets. It's much more economical to buy your sewer jetter kit and have it on hand whenever you need it.
Here I'll recommend four of the best sewer jetter kits on the market, all of which can be used with a standard pressure washer.
1. ZOFINE Sewer Jetter Kit for Pressure Washer
ZOFINE Sewer Jetter Kit for Pressure Washer is an excellent tool for clearing clogged drains. The kit includes a steel hose reel, a 40foot high-pressure hose, four different nozzle tips, and a rotating drain brush. The hose reel is easy to mount on any pressure washer, and the hose is made from durable materials that can withstand high pressure. The nozzle tips can blast away stubborn clogs, and the drain brush helps remove hair and other debris from the drain. The kit also comes with a storage case for easy transport. Overall, the ZOFINE Sewer Jetter Kit is an essential tool for anyone who wants to keep their drains clear and free-flowing.
2. West Bay Sewer Jetter Kit
West Bay high-pressure sewer jetter kit provides an easy and efficient way to clear clogged drains. The kit includes a 25-foot hose, a brass nozzle, and a 4.5 horsepower gas engine that delivers up to 3,000 PSI of pressure. With this power, the West Bay jetter can quickly clear away grease, grime, and tree roots that cause blockages. The kit also includes a wand attachment for reaching into tight spaces. For added convenience, the West Bay jetter kit has a storage case for keeping all components together. With its easy-to-use design and high performance, the West Bay sewer jetter kit is an essential tool for anyone who needs to keep their drains clear.
3. JetSnake Drain Cleaner for Your GAS Pressure Washer
JetSnake is the latest drain cleaning accessory for your pressure washer. Attach the Snake to your pressure washer wand, insert it into the drain and turn on the power. The high-pressure water will clear away any clogs in the drain, leaving it free and clear. JetSnake is safe for all drains, including kitchen and bathroom, sinks, showers, tubs, and even main sewer lines. Best of all, there are no chemicals or messy cleanups involved. JetSnake is the fast and easy way to keep your drains flowing freely.
4. Twinkle Star Sewer Jetter Kit for Pressure Washer
Twinkle Star Sewer Jetter Kit for Pressure Washers is an essential tool for any homeowner or business owner with a septic system. This powerful jetter uses high-pressure water to clean out clogged pipes and drains, removing years of built-up grease, grime, and debris. The included 50 ft hose gives you plenty of reaches to clean even the most hard-to-reach places, and the four nozzle tips allow you to customize the jetter's performance to suit your specific needs. So whether you're dealing with a slow drain or a complete blockage, the Twinkle Star Sewer Jetter Kit can help you get your septic system flowing freely.
Converting a pressure washer into a sewer jetter can be a cost-effective way to clean your sewer lines. Following the tips in this blog post, you can have your DIY sewer jetter up and running in no time. Have you tried using a pressure washer as a sewer jetter? Let me know how it went in the comments below.