How to Unjam a Bostitch Brad Nailer

To unjam a Bostitch Brad Nailer, first, disconnect the air supply. Then, open the magazine and remove any jammed brads. If necessary, use a small tool to clear debris. Reassemble the nailer and test it before resuming work.

In the realm of woodworking, a jammed Bostitch Brad Nailer can quickly turn a smooth project into a frustrating ordeal for beginners. Fear not, as this guide is crafted to simplify the process of unjamming your Bostitch Brad Nailer effortlessly. Whether you're a novice in the workshop or a seasoned DIY enthusiast, understanding the steps to resolve this common issue will empower you to continue with your projects seamlessly. Let's delve into the straightforward techniques that will have your brad nailer back in action in no time.

Table of Contents

Why does my Bostitch brad nailer keep jamming?

This is a common question that we get here at Bostitch. There are several reasons why your Bostitch brad nailer might be jamming. Here are the ten most common reasons:

1. Incorrectly installed fasteners:

if the fasteners are not aligned correctly in the magazine, the Bostitch brad nailer will not function correctly and may jam. To fix this, make sure that the fasteners are installed correctly in the magazine according to the manufacturer's instructions.

2. Clogged air passages:

if the air passages in the Bostitch brad nailer are clogged, this can cause the nailer to jam. To fix this, clean the air passages according to the manufacturer's instructions.

3. Faulty trigger:

if the trigger on the Bostitch brad nailer is not functioning correctly, this can cause the nailer to jam. To fix this, replace the trigger according to the manufacturer's instructions.

4. Damaged seals:

if the seals on the Bostitch brad nailer are damaged, this can cause the nailer to jam. To fix this, replace the seals according to the manufacturer's instructions.

5. Obstructed exhaust port:

if the exhaust port on the Bostitch brad nailer is obstructed, this can cause the nailer to jam. To fix this, clear the obstruction from the exhaust port according to the manufacturer's instructions.

6. Damaged magazine:

if the magazine on the Bostitch brad nailer is damaged, this can cause the nailer to jam. To fix this, replace the magazine according to the manufacturer's instructions.

7. Damaged fasteners:

if the fasteners in the Bostitch brad nailer are damaged, this can cause the nailer to jam. To fix this, replace the fasteners according to the manufacturer's instructions.

8. Incorrect air pressure:

if the air pressure in the Bostitch brad nailer is not set correctly, this can cause the nailer to jam. Adjust the air pressure according to the manufacturer's instructions to fix this.

9. Dry fire:

if the Bostitch brad nailer is fired without a fastener in the magazine, this can cause the nailer to jam. Do not dry fire the nailer to fix this, and make sure that there is a fastener in the magazine before firing.

10. Damaged parts:

if any parts on the Bostitch brad nailer are damaged, this can cause the nailer to jam. To fix this, replace the damaged parts according to the manufacturer's instructions.

Related: Corded Electric Brad Nailers

How to unjam a Bostitch brad nailer?

A Bostitch brad nailer is a versatile and powerful tool that can be used for various projects. However, like all tools, it can occasionally become jammed. If this happens, don't panic! You can follow a few simple steps to unjam your Bostitch brad nailer.

First, make sure that the power is turned off and that the magazine is empty.
Next, take a look at the jammed nail. If it is bent or damaged in any way, remove it from the tool.
If the nail is not bent or damaged, use a small screwdriver or other tools to push it back into the chamber gently. Be careful not to force it, as this could damage the tool.
Once the nail is back in the chamber, turn on the power and try firing again. If the nail still does not come out, repeat steps 2-4.
If the nail still will not come out after repeating steps 2-4, it is likely that the piston is jammed. First, remove the magazine and then unscrew the two screws that hold the piston in place.
Once the piston is removed, inspect it for any damage or debris. If it is damaged, replace it with a new one. If there is debris in the way, clear it out and then screw the piston back in place.
Finally, reassemble the tool and try firing again. If the nail still does not come out, take the tool to a qualified repairperson.

With these seven simple steps, you should be able to unjam your Bostitch brad nailer quickly and easily. So don't panic if your tool becomes jammed - follow these steps, and you'll be back to nailing in no time!

Watch the video on how to unjam a Bostitch Brad Nailer:

How do you troubleshoot a Bostitch brad nailer?

If your Bostitch brad nailer is having issues, you can do a few things to troubleshoot it. First, check to ensure that the air compressor is turned on and there is enough pressure. If the nailer is still not firing, check the air filter to see if it is dirty, and clean it with compressed air. Lastly, check the trigger to see if it is jammed. If it is, clear the jam and try again.

If you have followed all of these troubleshooting steps and your Bostitch brad nailer still is not working, you may need to contact a professional for help.

Final Words

If you've ever had the unfortunate experience of a Bostitch brad nailer jamming, you know how frustrating it can be. I've outlined seven simple steps to help you unjam your tool quickly and easily in this article. I hope these tips will help save you time and aggravation when your Bostitch brad nailer jams upon you. Have you tried any of these techniques? What has worked best for you when unjamming a jammed Bostitch brad nailer?

Related: Battery Powered Brad Nailers